Luna 20556-0105, Manual, Page: 31 / 88

28
1.0 Technical data
Artnr. .......................................... 20556 -0105 -0204
Luna ...................................................... BPT 260 A
Over length planing tables..............mm 1000
Lengt h thicknessing bed ...................mm 400
Max. working width .......................mm 260
Max. thicknessing capacity ............mm 160/155
Max. depth of cut planing ..............mm 3
Cutter block ....................................mm 63
Cutter block speed..........................rpm 6500
Noise ...........................................dB(A) <90
Thicknesser feed rate..................m/min 5
Motor speed....................................rpm 2800
Fence tilt........................................max. 45º
Height of planing beds from floor. mm 840
Motor voltage.....................................V 230 400
.............................................................. 1 phase 3 phase
Motor power....................................kW 2.0 2.2
Weight .........................................ca. kg 66
ENGLISH
Contents
1.0 Technical data ...................................................................28
2.0 Final Assembly .................................................................28
3.0 Setting of Fence ................................................................30
4.0 Connections to Power Mains ............................................30
5.0 Switch ...............................................................................30
6.0 Planing ..............................................................................30
7.0 Thicknessing .....................................................................32
8.0 Replacing Blades ..............................................................33
9.0 Belt Tension ......................................................................33
10.0 Care and Maintenance ......................................................33
11.0 Safety Instructions ............................................................34
12.0 User Responsibility...........................................................34
13.0 Wiring Diagrams...............................................................35
Parts list.......................................................................................75
Exploded view.............................................................................77
EC Declaration of conformity.....................................................79
FOR YOUR SAFETY:
READ ALL INSTRUCTION CAREFULLY
2.0 Final Assembly
2.1 Place legs into motor housing and secure with hex. Bolt
M8x16, spring washer Ø 8 and hex. nut M8.
2.2 Push rubber feet onto legs.
2.3 Take off both of the cover rails and fix the in-feed table.
Original instructions