Glossary:
1 – Objective Lens
2 – Infrared Illuminator
3 – Power/IR Switch
4 – Battery compartment cover
5 – Ocular Focusing Ring
6 – Rubber Eyecup
7 – Head-Mask Mounting Bracket
8 – Body
9 – Protective Lens Cover
INSTALLING THE BATTERIES:
Your night vision unit operates on 1 AA type battery, commonly
available in electronic stores, as well as in your local drug
stores and supermarkets.
To install the battery, unscrew the battery compartment cover
(4) and install the battery according to the diagram shown on
the body of the monocular inserting the positive (+) end first.
Once the battery is inside, replace the cover.
TURNING THE UNIT ON AND OFF:
Your night vision unit has a convenient Power/IR Switch (3). To
turn the unit ON, first remove the objective lens cover (9)
(ONLY IN THE DARK!) and turn the Switch (3) one dial to ON
position. Look through the Eyecup (6) – you should see green
glow. Even if the image is not yet sharp, the unit is operating.
To turn the unit OFF, turn the Switch (3) back one dial. The
green glow will disappear if you turn the unit off correctly.
Always replace the objective lens cover after the unit is turned
off and no longer is in use.
FOCUSING THE UNIT:
To obtain the sharp image, you must first rotate the Ocular
Focusing Ring (5) in either direction, until you notice in which
