SET SCREW
SPIGOT
LUMINAIRE
POLE
SMALL HOLDER
BRACKET
!
1
3
2
we brighten up your life
LUMZ PTE LTD
INSTALLATION MANUAL
LED PT 1011
Factory:
No.14, Jalan Anggerik Mokara 31/44, Kota Kemuning Seksyen 31,
40460 Shah Alam, Selangor, Malaysia.
Tel: (00603) 5121 1887
Fax: (00603) 5121 5187
Email: [email protected]
Singapore Office (HQ Sales & Marketing):
1 Coleman Street #10-06, The Adelphi,
179803, Singapore.
Tel: (0065) 9758 2771
www.lumzlighting.com
PT 1011/INSTALLATION MANUAL/REV.0
2/2
Place luminaire on the pole by sliding it so that
small holder bracket on the pole is fully
covered by the spigot.
Insert set screws and screw it.
Make sure all screws fix tightly.
Connect wires with connector.
# Make sure power is disconnected before installation
Loosen all screws on
luminaire window for wiring.
LUMINAIRE INSTALLATION
Connect wires from the luminaire to AC power as follows:
1. Connect BLUE / BLACK wire to the 'N' NEUTRAL wire.
2. Connect GREEN / YELLOW-GREEN wire to the EARTH wire.
3. Connect BROWN / RED wire to the 'L' LIVE wire.
Tighten all screws on luminaire
window after completed wire
connection.
