8
WARNING: Failure to observe safety precautions may result in fire, electric shock, or burns. Damage to the appliance caused by improper use will exempt the seller from warranty
service.
BEFORE THE FIRST USE
Unpack the appliance and remove all packaging materials and labels. Store warning labels (if available) and the product serial number plate on the housing!
Clean the device with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.
Make sure that there are no packaging materials or foreign objects (including products) inside.
Switch on all heating elements by selecting heating mode
, set the maximum temperature to 230°C and timer for 15 minutes. Some smoke or odour may be produced at the first switch-
on, this is normal and not a malfunction. At the end of this cleaning procedure, let the unit cool down, after which it will be ready for operation.
USING THE APPLIANCE
SWITCHING ON
Make sure the device is switched off (all three knobs are in the «Выкл/OFF» position).
Connect the device to the power supply.
Install a bake tray and/or wire rack, place the food. If the food is cooked on the wire rack, place the bake tray on the bottom level to prevent oil/grease/juice droplets from getting onto the heated
surfaces.
To switch the device on, turn the temperature adjustment knob "3" to set the desired temperature from 70 to 230°C.
Then turn the heating mode selection knob "4" to set one of the 5 heating modes.
Set the timer from 0 to 60 minutes by turning the timer setting knob "5".
The light indicator "6" will illuminate and the device starts working.
After the set time has elapsed, an audible signal will sound, the indicator light will go out, and the device will stop working.
If the products are not ready yet, set the additional operating time by turning the timer knob. DO NOT USE THE APPLIANCE MORE THAN 4 HOURS WITHOUT A BREAK.
HEATING MODE SELECTION
To set the desired heating mode, turn the heating mode adjustment knob "4" to one of the positions:
- the upper heating elements operating mode.
- the lower heating elements operating mode.
- the upper & lower heating elements operating mode.
- convection operating mode.
- rotisserie operating mode.
- all heating elements & convection operating mode are off.
TIMELESS OPERATION
Turn the timer knob to the left of the OFF position to the range indicated by the symbol
, then the device will operate without time limit..
Set the desired temperature from 70 to 230°C and one of the 5 heating modes.
The light indicator will illuminate and the device will start working.
