*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
4
4.1
Insert the wire nut connections in the driver housing and close
housing cover and secure using the 8 screws.
cover
driver housing
4.1
screw
Please read all instructions prior to installation and keep for future reference!
This LED Driver is to be installed in accordance with Article 450 of the National Electrical Code. The LED Driver must be
installed in a well ventilated area and free from explosive gases and vapors. Proper operation requires the free flow of air. As
this LED Driver is hardwired, it should only be installed by a qualified electrician. Suitable For Damp Location.
Page 2 of 2
Tunable White two 0-10V Channel 96 watt LED Driver -
Installation Instructions
Models PS010TW-96-24
REV0.0 11142019
PLENUM FOR
SUCH USE IN
ACCORDANCE
WITH UL2043
T 224.333.6033
www.opticarts.com
