luminii Explorer Wall EXPW Series, Installation Instructions

Page: 2 / 3

1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
3. Use only with Class 2 LED Driver.
Utiliser seulement avec la classe 2 unite d’alimentation electrique.
4. Suitable for damp location installations.
Please read all instructions prior to installation and keep for future reference!
1
1.1 From the back of the fixture, loosen the 4 set screws on the
fixture body. Then carefully remove the mounting plate.
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
info@luminii.com
www.luminii.com
Page 2 of 3
2
2.1 Connect the white (neutral) & black (hot) LED driver wires to the
white & black power wires (120VAC).
2.2 Place LED driver into the junction box.
3
3.1 Insert the low voltage wires through the center of the mounting
plate. Followed by lining up the mounting plate to the
junction box and secure using the provided screws.
3.2 Connect the ground in accordance with local electrical codes.
single gang
junction box.
LED driver
24VDC low
voltage wires
2.2
4.1 C24 VDC red wire from the fixture to the LED driver
+24 VDC red wire with a wire nut. Connect -24VDC black wire
from the fixture to LED driver -24VDC black wire with a wire
nut.
fixture
set screw
mounting plate
2.1
single gang
junction box.
mounting plate
24VDC low
voltage wires
screw
4
mounting
plate
24VDC low
voltage wires
1.1
3.1
4.1
3.2
fixture
Installation Instructions for Explorer Wall
Models EXPW-XX
REV0.2