background image

Warranty information

Limited warranty

Unless otherwise stated, your product is covered by a two (2) years parts 
and   labor   limited   warranty.   It   is   the   owner’s   responsibility   to   furnish 
receipts   or   invoices   for   verification   of   purchase,   date,   and   dealer   or 
distributor. If purchase date cannot be provided, date of manufacture will 
be used to determine warranty period.

Returning under warranty

Any Product unit or parts returned to Luminex LCE must be packaged in a 
suitable manner to ensure the protection of such Product unit or parts, 
and such package shall be clearly and prominently marked to indicate that 
the   package   contains   returned   Product   units   or   parts.   Accompany   all 
returned Product units or parts with a written explanation of the alleged 
problem or malfunction.

Freight

All shipping will be paid by the purchaser. Items under warranty shall have 
return   shipping   paid   by   the   manufacturer   only   in   the   European   Union. 
Under no circumstances will freight collect shipments be accepted. Prepaid 
shipping does not include rush expediting such as air freight. Air freight 
can be sent customer collect in the European Union.
Warranty is void if the product is misused, damaged, modified in any way, 
or for unauthorized repairs or parts.

GigaSwitch 8

Page 5 of 17

Summary of Contents for GigaSwitch 8


















Reviews: