Luminex GigaSwitch 8, User Manual

Page: 14 / 17

Wiring
RJ45 Wiring guidelines
Use data-quality (not voice-quality) twisted pair cable rated category 5 or
better with standard RJ45 connectors with or without Neutrik Ethercon
connectors. For best performance use shielded cable. Straight through or
crossover category 5 cable can be used regardless of the type of device
connected to the GigaSwitch 8. This is because the Gigawitch 8 supports
auto-mdi/mdix-crossover. 1000Mbps devices must be connected to the
GigaSwitch using 5e Category cable or higher.
Pair # Wire Pin #
1-White/Blue
White/Blue 5
Blue 4
2-White/Orange
White/Orange 1
Orange 2
3-White/Green
White/Green 3
Green 6
4-White/Brown
White/Brown 7
Brown 8
568-B diagram
Pair # Wire Pin #
1-White/Blue
White/Blue 5
Blue 4
2-White/Green
White/Green 1
Green 2
3-White/Orange
White/Orange 3
Orange 6
4-White/Brown
White/Brown 7
Brown 8
568-A diagram
Page 14 of 17 GigaSwitch 8