Toubleshooting
•
The Power/OK LED is always blinking
:
You're Ethernet-DMX8 MkII doesn't boot properly. Restart the unit
with the power switch. If this doesn't help, contact your local dealer.
Please note the Power/OK LED will be blinking during upgrade
procedure, don't switch off the power during this step.
•
My computer is connected to the node, but the Link/Activity
LED is still off
.
Check the Ethernet cable you're using, and check that each RJ45 on
each side of the cable is properly inserted. Feel free to plug another
cable to isolate the problem.
•
I can't reach the Web interface of the Ethernet-DMX8 MkII
Please check first the two previous steps. Then please be sure your
computer is set in the same IP range than your Ethernet-DMX8
MkII. Try to ping the unit with a dedicated application, such as a
DOS session on Windows, or a terminal session on MAC. You can
use LumiNet Monitor V2 to discover your Ethernet-DMX8 MkII. If
you can't see your device in LumiNet Monitor V2, please contact
your local dealer.
Page 34 of 35
Ethernet - DMX8 MkII Range
Summary of Contents for DMX8 MkII
Page 1: ...Ethernet DMX8 MkII Range User Guide V4 rev3...
Page 4: ......
