Connectivity
Rear panel
•
Mains
The device operates with an AC voltage between 90V and 260V within a
frequency range of 47Hz and 63Hz.
The power switch interrupts mains and battery power.
A fixed power lead with lose cable end is directly connected to the device
(no plug/connector). Please use an authorized plug and connect the cores
in the mains lead in accordance with the following scheme:
Green / Yellow:
Earth
Blue:
Neutral
Brown:
Live
!!! This equipment must be earthed !!!
Front panel
•
DMX input
Two Neutrik 5 pin gold plated male connectors are provided as zone A and
zone B input.
Connector
Function
Pin 1
Signal common (0 volt)
Pin 2
Data complement (-)
Pin 3
Data true (+)
Pin 4
Not used
Pin 5
Not used
Both inputs are compliant with the DMX512-A specification and are
terminated and biased. The 2 inputs are separately optical and galvanic
isolated from the outputs and from each other.
Page 6 of 12
DMX512-A 2.10 HUB
