Page 6
For technical questions, please call 1-888-866-5797.
Item 56521
Using the Controller to Select Color Mode
1. Instead of the Remote Control, the button on
back of the Controller (connected to power
cord) may be used to select color mode.
2. Press the Controller Function Button to cycle
through colors and color combinations.
Note:
When Controller is powered on,
it will start at the last color mode.
Controller
Function
Button
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
Cleaning, Maintenance, and Lubrication
BEFORE EACH USE,
inspect the general condition of the tool. Check for:
• loose hardware,
• misalignment or binding of parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
Replacing Battery in the Remote Control
1. Remove the screw from the back cover.
Back of
Remote
Control
Screw
2. Remove button battery from the Remote Control.
Keep the screw and note polarity of the battery.
3. Place new
CR2025 3-Volt
button battery in
Remote Control, carefully following polarity.
4. Replace back cover using the saved screw.
5. Program the Remote Control by
following the procedure on page 5.
6. Remote Control contains Li-Ion button cell battery.
Risk of fire and burns. Do not recharge, disassemble,
heat or incinerate battery. Keep battery out of reach
of children. Dispose of used batteries properly.
