Page 4
For technical questions, please call 1-888-866-5797.
Item 56521
Installation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Do not plug Power Cord/Controller into AC outlet until installation is complete.
Note:
Attachment hardware, such as hooks or nylon cable ties, sold separately.
1. If attaching to
GUIDE WIRE
, attach the ring at the back of
every bulb holder
to the guide wire using a S-hook or nylon tie (sold separately).
Guide Wire
Anchor guide
wire to structure
Anchor guide
wire to structure
Attach using S-hooks
or cable ties
2. If a guide wire is not used, connect securely to
STRUCTURE
at the
beginning and
the end
of
EACH
String Light using screw hooks (sold separately).
Structure
Support
24 feet
(minimum)
24 feet
(minimum)
Structure
Support
Structure
Support
Screw
Hook
Structure
Support
Connecting Controller and Multiple String Lights
Note:
Do not connect Power Cord / Controller until all String Lights are connected and secured.
1. Connect String Lights together by connecting the
female end connector of one string to the male
end connector of another string. Align the grooves
inside the connectors and tighten securely.
2.
At the end of the last string, attach the
end cap and tighten securely.
End Cap
String
Light
end
3. Connect Power Cord to Controller and
then attach them to the String Lights.
To Power
Outlet
Power Cord / Controller
String Light
Additional
String Light(s)
