3. Ceiling Fan Assembly
(Continued)
8
ETL Model No.: CF766L
MOTOR COUPLER
DOWNROD
REINSTALL
SET SCREWS (2)
THIS SIDE UP
THIS SIDE UP
3.9
While pulling up on the 8” Downrod, reinstall the two
Set Screws (previously removed) in the Motor Coupler
to secure the Downrod into place (Figure 9) .
NOTE: The Set Screws must be properly installed
as described above, or fan wobble could result.
It is critical that the set screws are securely tightened.
Failure to verify that the set screws are properly
installed could result in the fan falling.
WARNING
!
Figure 9
COUPLER COVER
GROMMET
DOWNROD
3.10
Make sure the Grommet is properly installed in the
Coupler Cover, then slide the Coupler Cover on the
Downrod until it rests on the Motor Housing (Figure 10) .
Figure 10
CEILING
COVER
DOWNROD
THI
S S
IDE
UP
THIS SIDE UP
THIS SIDE UP
Figure 11
3.11
Place the Ceiling Cover over the Downrod .
Be sure both the Ceiling Cover and the Coupling Cover
are oriented correctly (Figure 11) .
