22
ETL Model No.: CF235
7. Remote Control Procedures
(Continued)
Figure 34
FOR FANS WITH PULL CHAINS: For your Fan/Light
Control to operate properly, the Fan Pull Chain Switch
must be set to operate the Fan at HIGH Speed, and
the Light Kit must be switched to ON position. To avoid
accidental Pull Chain use, shorten Chains.
7.5
The Remote Control is designed to separately control
your Ceiling Fan Speed and Light Intensity (Figure 35).
There are Four Push Buttons (
., .., ..., ....
) to set the
Fan Speed.
Figure 35
7.4
When power is restored, push and hold the Fan
OFF Button ( ) for 3 to 5 Seconds to set the Code in
the Receiver (Figure 34).
NOTE: The Ceiling Fan Lights (if installed) will Blink
to indicate the Transmitter has been paired with the
Receiver.
To turn the Ceiling Fan OFF, press and release the Fan
OFF Button ( ).
POWER INDICATOR
LIGHT
FAN OFF
BUTTON
HIGH TO LOW
BUTTONS
POWER INDICATOR
LIGHT
