| E-mail: [email protected]
LED LIFE
• For maximum light output, adjust lighting circuits to provide between 10
-15 volts.
• Voltage can be regulated by
adjusting circuit load/run.
• T
o determine circuit voltage, use a digital voltmeter at the fixture.
INSTALLATION
A -Shroud B -Set Screw C-Waterproof Cover Lens D -Optic Lens E -Module F
–
Quick Connect G- Brass Housing
H-Assembled Fixture I- Spike J -Waterproof Wire Nut
LENS REPLACMENT
•
Carefully remove the fixture from its protective packaging.
•
Disassemble A,B,C,D,E,F,G according to the schematic diagram, select which optic lens
the application needs.
•
Connect fixture wires to main low voltage power wire, using outdoor rated waterproof wire connectors (J).
●
For PRO fixture, follow the instruction on our
LumienPRO’s remote control.