
5
Problem-solving
Replacement bulbs are available from Lumie.
�
I ran a test sunrise but the light came up really quickly.
When setting a test alarm make sure you allow enough time for a full
sunrise – the default sunrise takes 30 minutes. For example, if the
actual time is 11:00 the alarm time must be set no earlier than 11:30,
otherwise the sunrise speeds up in order to finish on time.
�
The light will not come on but the clock still works.
Check to make sure the bulb is fully screwed into the socket. If this
doesn’t work, try replacing the bulb.
�
Neither the clock nor the light works, or the clock is not doing what
I expect it to.
Turn off the power at the wall. Press and hold
E
as you turn the power
back on. This re-sets all the program options to their default state. If this
doesn’t work, check the fuse in the plug.
Please call the Lumie Careline (01954 780500) if you have any
other problems.
www.lumie.com
|
7
English
4
User guide
Sunset and sunrise – recommended routine
Use Bodyclock Starter to wake up and go to sleep at the same time
every day.
�
Use the - /+ buttons to turn on, adjust and turn off the light.
�
When you’re ready to sleep, press
E
to turn on the sunrise alarm
(alarm time shows/
A
displayed). Display auto-dim is triggered
when the light is at low level and the alarm is set.
�
This automatically starts the sunset and the light will slowly fade
down.
�
If you
don’t
want a sunset, simply turn off the light when you’re
ready.
�
When you wake up, press
E
to turn off the alarm.
Note: Both the audible alarm and the light will turn off after 20 minutes
if they are not turned off manually.
Sunset only – alternative routine
Use the routine below to enjoy a sunset without waking to a sunrise
alarm. Good for weekends!
�
When you’re ready to sleep, press both – and + at the same time.
Display auto-dim is triggered when the light is at low level and the
sunset is set.
�
This starts a sunset only and the light will slowly fade down.
�
If you don’t want a sunset, simply turn off the light when you’re
ready.
6
|
www.lumie.com
English
BCStI0905:Layout 1 23/6/09 13:25 Page 6