3
Programming
Just a few programs provide you with the basic Bodyclock
functions: a 30-minute sunrise to wake you up; a back-up alarm
beep for added reassurance; an optional 30-minute sunset to help
you sleep.
Clock time (default 13:00) –
T
shows on the display
Alarm time (default 07:00 –
S
shows on the display/
A
flashes
12/24hr clock (default 24hr) –
I
or
H
shows on the display/
OP
flashes
Audible alarm (default OFF) –
X
or
Y
shows on the display/
F
flashes
�
Press and hold
E
button until e.g.
T
shows on display.
�
Use – /+ buttons to change settings.
�
Press
E
button to skip to the next program.
�
Wait 12 seconds for the display to revert to normal or quick press on
E
to skip to next program.
All settings are saved for around an hour if the unit is unplugged or
if there's a power failure.
www.lumie.com
|
5
English
1
Safety
�
Keep the lamp cover over the bulb. Remove only when cold and
when the lamp is unplugged.
�
The lamp cover will be warm to the touch. Avoid covering it and
keep clear anything that may be damaged by heat.
�
Don't open the casing for any reason. There are no user-serviceable
parts inside.
�
Keep away from water and damp. For indoor use only.
�
Maximum 42W halogen bulb/40W candle bulb.
2
Getting started
The best position for Bodyclock Starter is by your bedside.
�
Remove the lamp cover with a gentle upward tug.
�
Screw in the bulb firmly and replace the cover.
�
Plug into the mains and you’re ready for
Programming
.
4
|
www.lumie.com
English
Actual time
AM/PM indicator
Audible alarm ON
Sunrise alarm ON
BCStI0905:Layout 1 23/6/09 13:25 Page 4