RJ4700-INS-LAB-RevB12
5
to Sit on Rollator Rest Seat
1. Push the hand brakes down, away from the handles, until the hand brakes lock into parked
position.
2. Test the wheels before sitting down to ensure the Rollator will not roll.
3. Before sitting, touch the back of your legs to the edge of the seat to ensure proper positioning
of the Rollator.
4. Hold onto handles if necessary to help you lower your body onto the seat.
WaRNiNG: ensure the brakes are in the locked position before using the rest seat.
WaRNiNG: distribute your body weight evenly on the Rollator rest seat. do Not lean
on one side of the Rollator.
WaRNiNG: before attempting to reach objects or pick them up from the loor by
reaching down between your knees, place both feet securely on the loor. use extreme
caution when reaching for any object.
WaRNiNG: do Not use this rollator as a wheelchair or transport device. Rollators aRe
Not intended to be propelled while seated.
Folding the Rollator for transport or Storage
1. Remove accessories, if any.
2. Lift the seat, move the pouch out of the way, and pull up on the folding pull strap attached to
crossbar underneath seat.
3. Rollator is ready for transport and storage after folding. You may elect to remove handles before
storage. The folding strap can be used to keep rollator frame folded for storage and/or transport.
CleaNiNG aNd maiNteNaNCe
• To remove dust and dirt, wipe Rollator gently with a clean, soft, damp cloth.
• Inspect wheels periodically for wear or damage. Verify that wheels are free of hair or any other
obstruction to free wheel operation. Inspect caster stems for assembly tightness. Use a clean,
soft cloth and a mild soap and water solution to clean, rinse with clear water, then dry with a
soft cloth.
s
NotiCe: do Not use solvents, abrasive cleaners, or scouring pads to clean this
product.
WaRNiNG: inspect the Rollator weekly for proper function and wear. Check it and
tightness of all nuts, bolts and knobs weekly. if any component is not in proper
working order or appears worn, contact your Graham-Field authorized distributor
immediately for repair and/or appropriate replacement parts.
WaRNiNG: if handgrips or hand brakes are loose, do Not uSe RollatoR. Contact
your Graham-Field authorized distributor immediately for repair.
WaRNiNG: the use of non-lumex replacement parts will void the warranty, and could
create a hazardous condition resulting in serious personal injury.
