Lumex FR601P Series Assembly And Operating Instructions Manual Download Page 12

LX_FR601-INS-LAB-RevD21 12

RECLINERS WITH HEAT AND MASSAGE OR HEAT ONLY FEATURE

HEAT AND MASSAGE: FR601PH, FR601UH, FR601PHL, FR601UHL 

HEAT ONLY: FR601PHO, FR601UHO, FR601PHOL, FR601UHOL
INSTALLATION AND OPERATING GUIDE

Tools required: masking or packaging tape

  WARNING: Important! Read and understand these instructions before assembling or 

using the Specialty Healthcare Seating Heat and Massage / Heat Only Unit. If you do not 

understand any part of these warnings, cautions or instructions, contact a healthcare 

professional for direction in the use of this product. If the Heat and Massage / Heat Only 

Unit is not properly assembled, personal injury and damage to the Heat and Massage / Heat 

Only Unit could result.

  WARNING: The recliner seat and back heating elements are wired to operate in series only. 

Do not change the system wiring in any way.

  WARNING: If components are damaged or missing, contact your Graham-Field authorized 

distributor immediately. DO NOT use substitute parts. Use only Lumex replacement parts. 

The use of non-Lumex replacement parts could cause personal injury, property damage, 

and void the warranty.

  WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury 

caused by improper assembly or use of this product.

Description

The Heat and Massage Unit offers three levels of seat and back heat, as well  as a gentle or firm 
massage function for just the lower back or both lower and upper back; the Heat Only Unit offers 
three levels of seat and back heat. The Lumex Healthcare Seating Heat and Massage / Heat Only 
Unit is a low-voltage (12V) Heat and Massage / Heat Only Unit, controllable by the user and / or 
caregiver via a handheld pendant. It is designed to enhance the comfort of the patient / resident 
during the use of Lumex Clinical Care Recliners.

Connection

The Heat and Massage Unit comes pre-installed in Lumex Clinical Care Recliners with the Heat and 
Massage Option. The Heat Only Unit comes pre-installed in Lumex Clinical Care Recliners with 
the Heat Only Option. During recliner shipment, the Heat and Selector 
Switch connections are disconnected. One connection at the control 
box is required to make the unit functional.

Main Components

1.  All Heat and Massage / Heat Only functions are controlled by the 

handheld pendant.

2.  The handheld pendant comes pre-installed and is shipped within 

the back compartment. To store the pendant when not in use or for 
caregiver use, place it in the pendant storage bracket mounted on 
the back of the recliner as shown at right.

Handheld Heat and Massage 

Pendant 

Shown in Storage Bracket 

on Back of Recliner

Summary of Contents for FR601P Series

























Reviews: