© 2007 GF Health Products, Inc.
2
2800-INS-LAB-RevB07
Trapeze-Base Assembly - refer to picture at right
1. Place the two base legs on the floor parallel to each other with leveling
glides on the floor, as shown at right.
2. Attach the A-frame to the base legs: Slide the A-frame legs down over
the upright posts projecting upward from the base legs. Slide the locking
pins through both base legs and A-frame legs. Slide loops over ends of
locking pins.
3. Install clamps on A-frame as shown at right; use the thumbscrews on
both sides of the clamps to tighten them. Ensure that clamps are secure
on A-frame.
4. Install trapeze post in both clamp center tubes; adjust trapeze to desired
height, ensuring that it passes completely through both center clamps.
Use the wing nuts on clamp center tubes to tighten clamps. Ensure that
trapeze post is secure in clamps.
Trapeze-Bed Headboard Assembly - refer to picture at lower right
WARNING: Perform this assembly while bed is unoccupied. At-
tach trapeze and clamps to metal-frame headboard
ONLY
.
1. Slide upper clamp onto bottom of trapeze post so that it is oriented as shown at right.
2. Slide lower clamp onto bottom of trapeze post so that it is oriented as shown at right.
3. Assemble both clamps onto bed headboard as shown; use the thumbscrews on both
sides of the clamps to tighten them. Ensure that clamps are secure on headboard.
4. Adjust trapeze to desired height, ensuring that it passes completely through both
center clamps. Use the wing nuts on clamp center tubes to tighten clamps. Ensure that
trapeze post is secure in clamps.
TrApeZe OperATION
WARNING: Before use, ensure that trapeze is correctly and securely as-
sembled, and that all clamps are tight.
WARNING: The trapeze is intended to be used
ONLY
as an assistive
device—that is, to enable patients to more easily and safely
reposition themselves. It is not intended to bear entire body weight.
WARNING: When using trapeze assembled to bed headboard, ensure that bed casters are locked
during trapeze use, to prevent unintended bed movement.
WArrANTY
GF Health Products, Inc. warrants the Lumex 2800A/2800GA Trapeze for a period of three years for defects in
workmanship and materials. During the warranty period, defective items will be repaired or replaced at GF Health
Products, Inc.'s option at no charge.
A-frame
thumb-
screw
pin
trapeze
post
clamp
A-frame leg
base leg
glide
Trapeze Base
Trapeze mounted on
bed headboard
