English
-
4
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the DC-W80 Document Camera:
1
Operation
1.1
Please use the product in the recommended operating environment, away from water or source of heat
1.2
Do not place product in tilted position or unstable trolley, stand or table.
1.3
Please clean the dust on the power plug prior to usage. Do not insert the product’s power plug into a
multiplug to prevent sparks or a fire.
1.4
Do not block the slots and openings in the case of DC-W80 Document Camera. They provide ventilation
and prevent the DC-W80 Document Camera from overheating.
1.5
Do not open or remove covers, otherwise it may expose you to dangerous voltages and other hazards.
Refer all servicing to licensed service personnel.
1.6
Unplug the DC-W80 Document Camera from the wall outlet and refer servicing to licensed service
personnel when the following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the product or the product has been exposed to rain or water.
2
Installation
2.1
For security considerations, please make sure the standard hanging rack you bought is in line with UL or
CE safety approbations and installed by technician personnel approved by agents.
3
Storage
3.1
Do not place the product where the cord can be stepped on as this may result in fraying or damage to the
lead or the plug.
3.2
Unplug the product during thunderstorms or if it is not going to be used for an extended period.
3.3
Do not place the product or accessories on top of vibrating equipment or heated objects.
4
Cleaning
4.1
Disconnect all the cables prior to cleaning and wipe the surface with a dry cloth. Do not use alcohol or
volatile solvents for cleaning.
5
Batteries (for products or accessories with batteries)
5.1
When replacing batteries, please only use similar or the same type of batteries.
5.2
When disposing of batteries or products, please adhere to the relevant instructions in your country or
region for disposing of batteries or products.
Precautions
This symbol indicates that this
equipment may contain dangerous
voltage which could cause electric
shock. Do not remove the cover (or
back). No user-serviceable parts inside.
Refer servicing to licensed service
personnel.
This symbol indicates that there
are important operating and
maintenance instructions in this
User Manual with this unit.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice :
The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
