3. Installation and Operating Instructions
3.1 Contents
The CELESTA light engine ships with the following list of standard components:
1.
The CELESTA light engine, configured with 7 output channels
(colors) and an output adapter for connection to an SMA-
terminated optical fiber as documented on the certificate of
conformance (Figure 1).
2.
A 24 V/9.2 A DC power supply (Lumencor part number
27-10019).
3.
A region-specific AC power cord for the power supply (see
adjacent table).
4.
RJ45 ethernet cable
5.
Control key, external gate jumper, and remote
interlock jumper (Figure 2)
6.
Quickstart Guide instruction document
(85-10049)
The model name, unique 4- or 5- digit serial number and
certification markings of the light engine are carried on a
label affixed to the rear panel. Performance specifications
for individual light engines are listed on the certificate of
conformance included with the shipping documents e-
mailed to the customer (Figure 1).
3.2 Installation
When setting the CELESTA light engine up for use, place
the unit on a hard surface and avoid blocking or restricting
airflow at the air inlets (front panel; Figure 3) or exhaust
ports (rear panel) on the enclosure. Restricting the airflow
will cause the unit to operate at elevated temperatures
and will result in decreased product life and/or premature
failure. The CELESTA light engine must be operated in a
non-condensing environment (dew point <10ºC with
controlled ambient temperature <30º C). Thermal overload
protection is provided by the on-board computer in
conjunction with an on-board temperature sensor. If the
internal temperature registered by the sensor exceeds 50°C
OR
the fan rotor is stopped, all light output channels
CELESTA Light Engine
®
Instruction Manual
8
AC Power Cords
Region
Part Number
North America
29-10002
Europe
29-10005
United Kingdom
29-10004
Israel
29-10008
Australia/New Zealand 29-10024
Figure 1.
Specimen certificate of conformance (C of
C) for CELESTA light engine. The C of C identifies the
color channels installed in the light engine and the
bandpass filters associated with each channel. Full
(100%) power outputs measured at the terminus of
the optical fiber are recorded in the third column.
lumencor
DRAFT
14940 NW Greenbrier Parkway • Beaverton, OR 97006 • 503-213-4269 •
www.lumencor.com
Performance Measurements For Lumencor Light Engine S/N
16112
Measurement Method
This product was measured using the custom output adapter installed on the light engine. The
output power was directed at a Coherent thermopile sensor head, model number ______, S/N
__________ attached to a Coherent ______________ Power Meter, S/N ___________. The
measurement system was calibrated on ____________. The meter scale was set to average mode
and the meter zeroed for each measurement. Measurements were taken at room temperature and
at initial turn-on.
Certificate of Conformance
n/a
512/30
555/28
635/22
475/28
747.5/11
440/20
406/20
Bandpass Filter
Color
Channel
Teal
n/a
Green
Red
Cyan
NIR
Blue
Violet
n/a
1000
1002
1019
1024
1013
1001
1005
Power (mW)
Mar 16, 2019
Tammy
Inspected By:
Celesta-NII-7F-A1
Lumencor Build Recipe:
Lumencor Part Number:
Customer Specification:
Document Part Number: 50-10027 rev C
Mar 26, 2018
0405I14R
0615I14R
7064
Total Power:
FieldMaxII-TO
PM30
Customer Part Number:
Fiber 1.5 - A
COC Output Adapter:
Burn-in Pattern
Note: If this light engine is re-sold, please
ensure that this certifcate is transferred to
the new owner.
n/a
Customer Deviation:
90-10512 Rev. A
SPECIMEN
