5
The procedure below results in the DRL illuminating WHITE whenever the key is “on”
(DRL function). Should you desire different functionality, you would alter the connections as
necessary. Below are two recommended methods for making these connections.
STEP 2: Making the DRL light electrical connection
Method A:
Making the DRL connection at a 12V accessory socket.
Method B:
Making the DRL connection at the fuse box with an “Add-a-fuse” connector.
Method A:
You may begin this step at either the driver or passenger side of the vehicle; we recommend
the driver side so that the red wire has a shorter path to the driver’s side interior.
The red halo switchback wire illuminates the DRL, and it must be connected to a circuit which
is “hot” with the ignition on.
Extend the red wire to the desired length for proper connection (in the photo below, we
extended this wire by crimping on an additional length of red wire).
A
B
