7
ENG
●
Connect the led lighting system to the power supply(this requires a separate connecting cable, which is included in
the package for lamps without controller). Check that the sockets are installed correctly and that the safety lock nut is
in correct possition. It is important that the connection are properly assembled, because an incorrect connection can
lead to melting of the socket, damage to the cable, power supply or the LED panel it’self, and in extreme cases it can
also cause ignition. Sockets that are damaged, deformed or incorrectly connected report to the dealer or manufacturer
immediately. Do not use lighting with damaged connectors.
There is no risk of electric shock, because direct current (DC) flows through the connector, but a faulty connector can
cause overheating and also skin burns.
●
If the led lighting system is equipped with an external controller, the power and lighting connectors are connected in
the controller. From the power supply, the connector is connected to the "INPUT" socket on the controller, and the
lighting connector is connected to the "OUTPUT" socket of the controller. The connectors cannot be mixed because
they are different shapes and designs and have special grooves for positioning. Check that the sockets are correctly
installed and that the safety nut is in place.
There is no need for an additional timer in addition to the controller, as the controller can control the brightness as well
as the time intervals expressed in minutes. Further descriptions and instructions can be found in the control unit
manual and the component programs can be accessed or downloaded from the official Lumen-aquatech website
(www.lumen-aquatech.com).
