4
!
Remarks concerning the operator safety:
P11P, P13P and P13B transducers are destined to be mounted on
35 mm DIN rails. In the range of operational safety they are in
conformity with the EN 61010-1standard requirements.
l
The installation and transducer connection should be
operated by a qualified personnel.
l
One must take into consideration all accessible protection
requirements.
l
Before switching the instrument on, one must check the
correctness of the network lead connection.
l
In case of the protection terminal connection with a separate
lead one must remember to connect it before the connection
of network leads.
l
Do not connect the instrument to the network through an
auto-transformer.
l
Before taking the transducer housing out, one must turn
the supply off.
l
The removal of the transducer housing during the guarantee
contract period may cause its cancellation. The programmer
connector is destined only for the PD11 programmer
connection. After the transducer programming, one should
put the hole plug of the programmer connector.
3. TRANSDUCER SET
The transducer set includes:
- P11P or P13P or P13B transducer 1 pc
- service manual
1 pc
- guarantee card
1 pc
