EN
22
3.4.1. Value Change Way of the Chosen Parameter
In order to increase the value of the selected parameter, one must
press the
button. A single pressure of the button, causes the
increase of the value of 1. The increase of value when displaying the di-
git 9 causes the setting of 0 on this digit. The change of the digit follows
after pressing the
button.
In order to accept the set up parameter, one must hold down the
button. Then, the write of the parameter and the display of its symbol
follows alternately with the new value. The pressure of the
but-
ton during the change of the parameter value will cause the resignation
of the write.
3.4.2. Changing Floating-Point Values
The change is carried out in two stages (the transition to the next stage
follows after pressing the
button):
1) setting the value from the range -19999...99999, similarly as for in-
tegral values;
2) setting of the decimal point position (00000., 0000.0, 000.00, 00.000,
0.0000); the
button shifts the decimal point to the left, howe-
ver the
button shifts the decimal point to the right;
The pressure of the
button during the change of the parameter
value will cause the resignation of the write.