1. Application
Digital clocks of the DLZ type are used to display current time indoors. They can also display the
current date and, in cooperation with the P8 transducer, the temperature and humidity. The communi-
cation interface of the clock allows for easy configuration of the clock, and the second inbuilt interface
RS8 makes it possible to cooperate with the temperature and humidity transducer. The transducer
output values can be read by means of the user interface.
The DLZ clocks are equipped with a programmed brightness function to allow for energy savings when
the clock does not need to work, or when full brightness could dazzle the user.
The DLZ clocks are used wherever there is a need for the current time, date, temperature and humidity
to be displayed.
It is possible to adjust the clock in accordance with the customer alignments.
2. Clock kit
The clock kit consists of:
l
DLZ clock - pc.
l
Assembly holder - pc.
l
Service manual
l
Guarantee certificate
3. Basic requirements and operational safety instructions
The DLZ clocks conform to the PN-EN 600- safety standard. The following advice must be
observed and adhered to during the installation process and operational use:
l
Only qualified technical personnel should perform the installation and connections of the clock.
All possible safety stipulations should be observed.
l
The correctness of electrical connections must be checked before supplying them with current.
l
Do not use an autotransformer for connecting the clock to the mains supply.
l
Do not mount the clock outdoors.
l
The display must be used according to its intended purposes only.
l
Removing the panels housing within the guarantee period will cause the guarantee to expire.
l
Disconnect the display from the power supply before opening the housing. The housing contains
live terminals hazardous to life and health.
l
When connecting the mains, protect the device with the breaker switch or circuit breaker. The
mentioned switch should be in the vicinity of the device, easily accessible to the user and
labelled as the cut out of the device.
