Lume Cube MAVIC 2 MOUNT Installation Download Page 4

Page: 4 / 4

*Note: Ensuring the triangle is lined up and firmly

pressed down into the triangular shaped cavity is

integral for safe flying.

Once the front of the mount is installed, push down on the back legs of the

Mavic 2 Mounts to securely attach the mounts to the back legs of the drone.

Ensure they are fully pushed down secure. Finally, firmly press down on the

mounts to ensure a snug fit.

Scan me for

video instruction

*Liability Disclaimer: Lume Cube is not liable for any damage to

drone caused by operator error or incorrect mounting to drone.

Press down on the front of the Mavic 2 Mounts to fit the triangular notch into the

similar shaped cavity on the Mavic 2 drone. This should be a tight fit.

Happy flying!
For Video Instructions visit: www.lumecube.com/mavic2installation

Front Leg

PUSH DOWN

Back Leg

Incorrect

Correct

Summary of Contents for MAVIC 2 MOUNT

Page 1: ...allation can lead to drone operation error Lume Cube cannot be held liable for drone damage REVERSE SIDE FOR INSTRUCTIONS MAVIC 2 MOUNT INSTALLATION Liability Disclaimer Lume Cube is not liable for an...

Page 2: ...d direction Mount your Lume Cubes to your Mavic 2 Mounts prior to mounting them on the drone Simply screw your Lume Cubes onto the screw on each mount figure 1 Angle your lights in the desired directi...

Page 3: ...the Mavic 2 figure 2 This part of the mount will be installed on the drone first Prior to mounting your lighting kit to the drone make sure each mount is on the correct side by ensuring the buttons o...

Page 4: ...down secure Finally firmly press down on the mounts to ensure a snug fit Scan me for video instruction Liability Disclaimer Lume Cube is not liable for any damage to drone caused by operator error or...