Lume Cube MAVIC 2 MOUNT Installation Download Page 2

Page: 2 / 4

Make sure the tension disk is screwed onto the ¼” 20 screw on the mounts

(figure 1). You will use this to angle your Lume Cube in the desired direction.

Mount your Lume Cubes to your Mavic 2 Mounts prior to mounting them on the

drone. Simply screw your Lume Cubes onto the screw on each mount (figure 1).

Angle your lights in the desired direction, and then spin the tension disk counter

clockwise (figure 2) until it tightens on the base of the Lume Cube.

(figure 1)

(figure 2)

(figure 1)

Summary of Contents for MAVIC 2 MOUNT

Page 1: ...allation can lead to drone operation error Lume Cube cannot be held liable for drone damage REVERSE SIDE FOR INSTRUCTIONS MAVIC 2 MOUNT INSTALLATION Liability Disclaimer Lume Cube is not liable for an...

Page 2: ...d direction Mount your Lume Cubes to your Mavic 2 Mounts prior to mounting them on the drone Simply screw your Lume Cubes onto the screw on each mount figure 1 Angle your lights in the desired directi...

Page 3: ...the Mavic 2 figure 2 This part of the mount will be installed on the drone first Prior to mounting your lighting kit to the drone make sure each mount is on the correct side by ensuring the buttons o...

Page 4: ...down secure Finally firmly press down on the mounts to ensure a snug fit Scan me for video instruction Liability Disclaimer Lume Cube is not liable for any damage to drone caused by operator error or...