Lumberjack TS254PL, Original Instructions Manual

Page: 11 / 27

TS254PL 09
OPERATION
Transporting the Machine
‐ With the machine in transport mode, push
the button to release the handle and pull the
saw behind you on its wheels.
Changing the Blade Depth and
Angle
‐ When operating the blade should be set to
cut approximately 1/4in higher than needed.
‐ The blade is raised and lowered by turning
the Height adjustment handle.
‐ The blade angle is adjusted by unlocking the
bevel lock, setting the position by turning the
inside handle, and then relocking the lock.
Extending Table
‐ This is set by pulling the table locking lever,
setting the desired length then relocking the
lever.