Lumberjack SCMS210SB, Operating Manual

Page: 14 / 23

SCMS210SB 12
Maintenance and Service
Before any work on the machine itself,
pull the mains plug.
If the machine should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried out by an
approve service centre.
– Store the tool, instruction manual and
accessories in a secure place. In this way you
will always have all the information and parts
on hand.
Cleaning
For safe and proper working, always keep the
power tool and its ventilation slots clean.
The retracting blade guard must always be
able to move freely and retract automatically.
Therefore, always keep the area around the
retracting blade guard clean.
Remove dust and chips after each working
procedure with a brush or by blowing out with
compressed air.
Keep the tool’s air vents unclogged and clean
at all times.
Never use caustic agents to clean plastic parts.
General Inspection
– Regularly check that all the fixing screws are
tight. They may vibrate loose over time.
Service
– Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
–When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow
Maintenance Instructions may create a risk of
electric shock or injury.