Lumberjack SCMS210SB, Operating Manual

Page: 10 / 23

SCMS210SB 08
ASSEMBLY
Avoid unintentional starting of the
machine. During assembly and for all
work on the machine, the power plug
must not be connected to the mains
supply.
Carefully remove all parts included in the
delivery from their packaging.
Remove all packaging material from the
machine and the accessories provided.
Before starting the operation of the machine
for the first time, check if all parts listed in the
box content section have been supplied.
Note:
Check the power tool for possible
damage. Before further use the machine,
check that all protective devices are fully
function. Any lightly damaged parts must be
carefully checked to ensure flawless operation
of the tool. All parts must be properly
mounted and all conditions fulfilled that
ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service
centre.
Always tighten the locking knob (20) &
(12) firmly before sawing.
Otherwise the
saw blade can become wedged in the
workpiece.
Transportation
Lift the mitre saw only when the saw arm is
locked in the down position, the saw is
switched off and the plug is removed from the
power point. Only lift the saw by the operating
handle (
5 ) or outer castings. Do not lift the saw
using the guards.
Stationary or Flexible Mounting
To ensure safe handling, the machine
must be mounted on a level and stable
surface (e.g. workbench) prior to using.
Mounting to a Working Surface
– Fasten the power tool with suitable screw
fasteners to the working surface. The mounting
holes serve for this purpose.
– Clamp the power tool with commercially
available screw clamps by the feet to the
working surface.
Mounting to a Saw Stand
Any universal saw stand which will accept
mounting holes 404mm wide by 263mm in
length will suffice.
Read all safety warnings and instructions
included with the worktable.
Failure of
observing safety warnings and instructions can
lead to electrical shock, fire and/or cause serious
injuries.
Assemble the worktable properly before
mounting the power tool.
Perfect assembly
is important in order to prevent the risk of
collapsing.
– Mount the power tool in transport position on
the saw stand.
Dust/Chip Extraction
Dusts from materials such as lead‐containing
coatings, some wood types, minerals and metal
can be harmful to one’s health.
Touching or breathing‐in the dusts can cause
allergic reactions and/or lead to respiratory
infections of the user or bystanders.