Lumberjack RT1500, Original Instructions Manual

Page: 11 / 25

RT1500 09
ASSEMBLY
Front Feather
‐
board (8) Assembly
– Attach the front feather‐board (
8
) using 2 x
square washers (
18
), 2 x Flat feather‐board
screws ( 20 ), 2 x large washers ( 16 ) and 2 x
knob nuts ( 14 ). To do this thread the flat
feather‐board screw ( 20 ) with a square washer
( 18 ), then thread this through the feather‐
board (
8
). Next thread on a large washer (
16
),
and finally loosely thread on knob nut (
14
).
– Complete this for both sides of the feather‐
board (
8 ). This will then thread neatly through
the trench in the table top giving the following
result, and a free flowing feather‐board (
8 ).
Router Rise and Fall Handle (6)
Assembly
– Unscrew the screw for the handle aperture
– Align the Handle (
6 ) with the aperture
Be aware
this has a semi‐circular design and
will only fit on in one way. As such please do not
try to force on the handle
6
as it may damage
the tool.
– Once pushed on using screwdriver to tighten
the screw back up.
Stationary or Flexible Mounting
To ensure safe handling, the machine
must be mounted on a level and stable
surface (e. g., workbench) prior to using.