![Lumberjack RT1500 Original Instructions Manual Download Page 10](http://html1.mh-extra.com/html/lumberjack/rt1500/rt1500_original-instructions-manual_1947748010.webp)
RT1500 08
ASSEMBLY
– Attach the feather‐boards to each side using
2 x feather‐board screws (
15
), 2 x knob nuts
(
14
) and 2 x large washers (
16
).
Be aware
that the feather‐boards (
8
) attach
to the back guide fence (
2
) through the slotted
holes in the fence base (
9
) and the circular
holes in the back support (
12
). Also the knob
nuts (
14
) are used at the front of the feather‐
boards (
8
).
– The above is needed on both sides of the back
support
– Attach the built back fence guide (
2
) to the
table top using 2 x back guide fence screws
(
19
), 2 x large washers (
16
) and 2 x knob nuts
(
14
)
.
be aware
that the screws must be inserted
through the slotted hole on the table from
underneath so that the knob nuts (
14
) can be
used from the top.
Summary of Contents for RT1500
