NS18G 08
OPERATION
APPLICATION ADVICE
. Fastening panels.
.Do not use the tool for fastening ceiling
panelling on profiled wood or grooves.
. Fixing textiles!
. Avoid blank shots in order to reduce the wear
of the impact strike.
NAIL INSTRUCTIONS FOR TACKERS
. Roughly, the hardness of wood is divided into 3
levels:
-High
-Medium
-Low
. Nails of different length are applicable for
different wood hardness.
. The tool has recoil when firing, so two hands
operation is suggested, to have a better control of
the operation.
UNBLOCKING JAMMED FASTENERS
. In the unlikely event that nails become jammed,
follow these
instructions to remove them
! unplug power cord from power source before
removing
-Remove the nose tip I
-Remove the plate retaining bolts
-Remove the safety mechanism retaining plate
-Remove the firing pin retaining plate
! Note the location as well as the order in which parts
are removed from the tacker, this will make it easier
to rebuild it
