BDE1100 07
ASSEMBLY
Avoid unintentional starting of the
machine. During assembly and for all
work on the machine, the power plug
must not be connected to the mains
supply.
Carefully remove all parts included in the
delivery from their packaging.
Remove all packaging material from the
machine and the accessories provided.
Before starting the operation of the machine
for the first time, check if all parts listed in the
box content section have been supplied.
Note:
Check the power tool for possible
damage. Before further use the machine,
check that all protective devices are fully
function. Any lightly damaged parts must be
carefully checked to ensure flawless operation
of the tool. All parts must be properly
mounted and all conditions fulfilled that
ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service
centre.
Assembling the Dust Collector
In the shavings container (2) you will find all the
components of the hose collection system. Take
all parts out and check to make sure that you
have everything listed below.
8. Filter cartridge
9 .Filter bag
5 .Exhaust hose
6. 2 x hose clamps
7. Hose coupling d 100 mm
Mounting the Filter Bag
– Place filter cartridge (
8
) into filter bag (
9
).
– Fold any excess bag (
9
) inside the filter
cartridge (
8
).
– Now plug the filter cartridge (
8 + 9
) onto the
motor casing (
10
).