– Place the entire section into the shavings
container (
2
) and secure with locking strap (
4
).
– Mount the collector hose (
5
) to the shaving
container (
2
) using one of the 2 hose clamps
(
6
).
– Attach the other end of the collector hose (
5
)
to the hose coupling (
7
) using the other hose
clamp (
6
).
Operation
– Use the supplied adaptor set find the best fit
for the machine on which you intend to use the
dust collector.
– Make sure the fitting is tight and securely in
place before you start the dust collector up.
– Turn on the dust collector before the power
tool, and turn off after you have first switched
off the power tool.
Maintenance and Service
Before any work on the dust collector itself,
unplug the mains plug.
For safe and proper working, always keep the
dust collector and ventilation slots clean.
If the replacement of the supply cord is
necessary, this has to be done by an authorized
service agent in order to avoid a safety hazard.
If the dust collector should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised
service centre.
Shavings Container (2)
Wipe out the container (
2
) from time to time
with a commercially available, non-scouring
cleaning agent and allow drying.
BDE1100 08
OPERATION & MAINTENANCE AND SERVICE
