Lumberjack AG820, Safety And Operating Manual, Page: 11 / 17

AG820 09
OPERATION
- Flange arrangement when using a depressed-
centre cutting wheel (Fig. 8)
- a) Clamping flange
- b) Flange nut
- Flange arrangement when using a straight
cutting wheel
- a) Clamping flange
- b) Flange nut
Rough grinding
Caution: Use the safety device for
sanding/grinding (included in items supplied).For
the best rough grinding results, hold the grin-
ding wheel at an angle of between 30° and 40°
to the workpiece surface and guide back and
forth over the workpiece in steady movements.
Cutting
Caution: Use the safety device for abrasive cutting.
When you use the right-angle grinder for cutting
purposes, avoid tilting it in the cutting plane. The
cutting wheel must have a clean cutting edge. A
diamond cutting wheel is best used to cut hard
stone.
It is prohibited to use the machine on asbestos
materials! Never use a cutting wheel for rough
grinding.