IMPAC pyrometers IN 210 · IN 210/4 · IN 210/5
12
8
Settings via service interface
8.1
with HT 6000
(accessory)
The HT 6000 is a portable battery driven instru-
ment for the pyrometer parameter settings and
indication of temperature.
The pyrometer has to be connected to the HT 6000
via its service interface cable with the female SUB-
D connector. When the HT 6000 is switched on it
recognizes the pyrometer automatically and the
preset parameters can be displayed. With the
“
PAR
” button the different parameters can be
called. With the arrow buttons
and
the values
of the parameters can be selected and confirmed
with the “
ENTER
”
button. If no button is pressed for
30 s the HT 6000 changes to the temperature
indication
without accepting the changed value
.
8.2
with the software
InfraWin
(only via optional available USB adapter)
InfraWin
is an adjustment and evaluation software that can
be used to read out the available parameters of the pyrome-
ter and change them, if required. Additionally the measure-
ment can be observed via a graphical surface.
For that purpose the pyrometer has to be connected to a PC
with the LumaSense USB adapter. The software recognizes
the pyrometer automatically and the preset parameters can
be displayed and changed via keyboard or a choice box, if
required.
The further functions are available:
Reading and changing pyrometer parame-
ters
Graphical display of the current tempera-
ture or the temperature progress
Recording of measurement curves
Subsequent analysis, graphically or in
table form, for print-out or export
Spot size calculator to calculate the spot
sizes in any distances
Display
On/Off
Selection of
parameters
Up / Down
Confirmation
SUB-D connector
