INC.
Lumascape USA Inc.
1300 Industrial Rd., Unit #19
San Carlos, CA 94070, USA
T 1-(650)-595-LUMA(5862)
F 1-(650)-595-5820
E [email protected]
W www.lumascape.com
Free Call
US & Canada
1-866-695-LUMA(5862)
Lumascape USA Inc. 2006
©
www
.lumascape.com
T 1-(650)-595-LUMA(5862) 1-(650)-595-5820
LUMASCAPE USA INC
Free Call 1-866-695-LUMA(5862)
C1778US 09_2006
Warning: The Luminaire should only be used complete with its protective shield (cover)
IMPORTANT INSTRUCTIONS
For Installation LS482 Halogen Bi-Pin
1
Mounting fasteners
not supplied by
Lumascape
Surface Mount Plate
300mm
(1
1.8in)
Direct Burial Post
Mounting fasteners
not supplied by
Lumascape
Discreet Mount
Outside
3
3
INTEGRAL MODEL
WIRING ONLY:
Remove gear tray
from post.
Pull cable through
gland and tighten.
Connect leads to
terminal block.
Ensure that the earth
terminal is fitted to the
inside of the post.
Slide gear tray back
into the post.
REMOTE MODEL
WIRING ONLY:
Remove gear tray
from post.
Pull cable through
gland and tighten.
Connect leads to
terminal block.
Slide gear tray back
into the post.
5
Fit the head
onto the post
and seal by
tightening all
three screws.
4
Important Notes:
Rubber seal protects
gear tray from moisture.
Do not use force.
Make sure seal fits
tightly against post.
Important Notes:
Rubber seal protects
gear tray from moisture.
Do not use force.
Make sure seal fits
tightly against post.
2
Remove the head
from the post by
unscrewing the
three screws.
OR
Relamping
1
2
Remove head as shown in
.
Remove old lamp from fixture as shown.
step 2
3
4
Insert lamp into fixture as shown in
Seal fixture as shown in
.
step 4.
step 5
Check the lamp wattage and insert
the lamp into the lampholder.
Test to ensure that the lamp and
fixture is operational.
MODELS
LS482-293XXXQX BI-PIN INTEGRAL
12V 50watt Halogen Bi-pin Max.
LS482-293XXXRX BI-PIN REMOTE
12V 50watt Halogen Bi-pin Max.
IP66 rated
PCD Ø4.7” (120mm)
Hole Size Ø0.4” (11mm)
