IN0094 - 28 May 2014
Copyright ©2014 Lumascape Lighting Industries Pty. Ltd. ABN 21 010 572 773
www.lumascape.com.au
WARNING - To reduce the risk of FIRE or INJURY:
1. Luminaires and transformers to be installed by licensed electrical contractors.
2. Luminaires to be used for intended purpose only.
3. Do not operate the luminaires with a missing or damaged parts.
4. Use only genuine Lumascape parts to replace damaged or missing components.
5. Refer to instructions for installation and operating requirements.
6. Ensure installation complies with local regulations
Voltage insulation test (megger) will permanently damage product and will void warranty.
SAVE THESE INSTRUCTIONS.
SAFETY INSTRUCTIONS
Questions?
Call +61 7 3286 2299
Email [email protected]
www.lumascape.com.au
Correct installation
Incorrect installation. Void warranty
Do not allow soil, fill or any material to build up around the luminaire.
Warranty will be void.
3.
4.
2 Nm
4 Nm
2 Nm
Mount luminaire on base:
Screw top of luminaire to base ensuring the gasket seal is firmly in
place between the two components.
Aim luminaire:
Loosen the adjustment screws to change the aim of the luminaire. Once
you have the desired tilt and rotation re-tighten the adjustment screws
to lock the luminaire in place.
