INSTALLATION INSTRUCTIONS
SURFACE MOUNT
ADJUSTABLE SPOTLIGHT
LUMASCAPE ASIA PACIFIC
Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
Phone +61 7 3854 5000 | Fax +61 7 3854 5001 | Email: [email protected] |
www.lumacape.com
LUMASCAPE NORTH AMERICA
1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA
Phone +1 650 595 5862 | Fax +1 650 595 5820 | Email: [email protected] |
www.lumacape.com
Products and specifications are subject to change without notice.
USA I Australia I Asia I Middle East I Europe
3 / 4
IN0182US N181130
Centria
C4
LS1010
Connect the supply cable to the
terminal block. Refer to table
below for conductor colour and
designation.
Re-attach lid to base, making sure the seal is correctly placed between the two components.
Bolt luminaire to mounting surface making sure the
gasket seal is inserted between the mounting surface
and the wall.
Connect Supply Cable
Mount Base to Wall
Close Luminaire
Seal
Gasket
Seal
To Light Engine
Conductor
colours
shown are for
a standard
Lumascape
leader cable.
Colour
Designation
White
Neutral
Green
Earth
Black
Active
Red
Data
To Light Engine
To Light Engine
