background image

 

17

FCC Notice: 

This device complies with Part 15 of the FCC Rules. Operation is subject to the two following 

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause 

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation.

Important Information:

Before installing, read and follow all precautions, including the following:

CAUTION:  RISK OF ELECTRIC SHOCK OR FIRE

TAP must be installed and used in accordance with the National Electric Code. Please 

consult a licensed electrician if you are uncomfortable or unfamiliar with electrical work. 

Disconnect power before installing or modifying this product.  

CAUTION: 

Suitable for indoor use only.

Support:

If you encounter any issues, please contact us at [email protected] for help.

To explore our full selection of products, visit us at: www.lumary.tech

Made in China

Summary of Contents for SMART Wi-Fi




















Reviews: