4
LumaPro Operating Instructions
53DK24
LED Recessed Troffer
Mounting Instructions
1.)
Bend hang bracket by 90°, making it
vertical to the rear cover of panel light
(
Figure 1A
). Bend hang bracket’s top
part 90° (
Figure 1B
). Do so for all hang
brackets.
2.)
Remove the ceiling tile at an appropriate
location where the product is to be installed,
and raise the product above the bar.
3.)
Place one end of the product on the T-
bar.
4.)
After securing the product on the T-bar
with hang bracket (as shown in step 1),
secure panel to the ceiling with aircraft
cable or wires capable of supporting 100lbs
minimum.
5.)
With the power turned off, remove the
cover of the junction box. Remove the
knock-out(s), feed the wire through and
connect according to the wire diagram
(shown above).
6.)
Close the cover the junction box.
