Section 2 – Overview
Copyright 2009-2016 Lumagen, Inc.
Radiance Pro, Rev 040116
6
control the display setup and calibration. The Output configurations are specified by selecting a Mode, CMS and Style
for each input, input memory, input resolution, and 2D/3D mode.
The Radiance has four input memories
(
MEMA
,
MEMB
,
MEMC
and
MEMD
)
. Each input memory has sub-
memories for the various possible input formats. These are automatically selected based on the input resolution and
vertical-rate. The “Other” entry represents all the other possible input resolutions and vertical rates. Each input
resolution and vertical rate has 8 sub-memories which can be selected on a per-input and per-input-memory basis.
Each Input sub-memory can be independently linked to any one of the eight Output Modes, eight CMS memories, and
eight Style memories. These store setup data for the video display setup and calibration. In the factory default condition
all input sub-memories are linked to “Mode 0,” “CMS 0,” and “Style 0.” To change these enter
MENU
→
Output
→
Output Setup
→
(2D/3D)
→
OK
→
(Mode, CMS, Style)
. These settings can be changed for each input sub-
memory. To “Save” new settings, enter
MENU
→
Save
→
Save
→
OK
.
NOTE:
By default all sub-memories point to Mode0, CMS0, and Style0.
In most
systems the default configuration does not need to be changed.
NOTE:
Changes must be Saved to make them permanent. If changes are not
Saved the Radiance Pro will revert to Saved settings when turned off.
Input memory to output configuration block diagram
