Lumag HGM-85055, Operator'S Manual

Page: 20 / 36

-14-
(GB)
!
Do not refill fuel when the engine is in operation or when it is hot. Only refill fuel in an open area and do not smoke during
refilling. The fuel may only be stored in containers intended for this purpose.
!
Do not start up and leave the engine running in closed areas where there is risk of dangerous concentration of the poisonous
carbon monoxide.
!
You must not touch the exhaust and cylinder ribs in case of hot or running engine. This could lead to burns.
!
In case of works on the cutting mechanism, wait for the knife to stop. Remove the end piece from the spark plug in order to
prevent engine start-up When dismounting the knife, use increased caution. The knife edges are sharp, use gloves.
!
Do not operate the machine without safety and protective covers and do not operate a machine with damaged protective and
safety equipment.
IV. Main Technical Data
Trade name BRAVO
Supply number 5317 5317MB 5317AG
Length
1,500 mm
Height 1,100 mm
Transport height 660 mm
Width 660 mm
Weight
70 kg
Max. coverage 550 mm
Engine
Briggs-
Stratton
850 Series
Honda GCV
160
Honda GCV
190
Output (kW)
4,4 4,1 4,9
Max. operating revolutions (RPM)
3000 3000 3000
Guaranteed acoustic power level L
wa
(according to ČSN ISO 11 094) (dB)
90 92 94
Resulting weighted vibration value
(according to ČSN EN 836+A1 change A2) (m/s2)
2,8 1,6 2,1
Noise level at the operating position L
A
(according to ČSN EN ISO 11 201) (dB)
76,6 80,3 82,8
V. Preparations for Use
Check the fixing of the mulching knife and its integrity.
Before first engine start-up, check the oil level on the gauge; refill the oil if necessary.
2. Handlebar Adjustment
Change the handlebar position by loosening the nut with lever (1) and readjusting the upper handlebar part to the lower part.
Then tighten the nut with lever. It is advisable to adjust the nut lever to a horizontal position, so that it does not impede
starting, Fig. 2.