Lumag HGM-85055, Operator'S Manual

Page: 19 / 36

-13-
(GB)
III. Safety Instructions
The following symbols are located on the machine:
The user of the machine is responsible for accidents or dangers arising to other persons or their property. Thus, the person
has to take into consideration that other persons and animals are located at a safe distance of at least 30 meters from the machine (Fig.
1). In case the operator discovers the presence of persons and animals within a dangerous distance, he must immediately turn off the
machine and not start it until this area is clear.
!
Do not let children and persons unfamiliar with these instructions operate the machine. Abide by local regulations concerning
minimum age of operators.
!
Do not operate the machine in case you are sick or under the influence of alcohol, drugs or medicines.
!
Before starting work, make sure that the machine is in good technical condition. Never mow if any part is damaged or loose.
Tighten loose connections, replace damaged parts. Use original spare parts only.
!
Before starting work, make sure that the area you are about to mow does not contain any solid objects in the vegetation
(stones, wires, pipes, massive branches, and the like) that must be removed, since they could be shot out or could damage the
mulching knife.
!
Always use working boots and long trousers at work. Do not work without shoes or in light sandals.
!
Use safety goggles during operation.
!
During backward movement with the machine there is danger of tripping, thus you should exert utmost caution.
!
You must not lift the machine. The machine may only be inclined during operation when the cutting knife is turned to the
opposite direction than the operator is standing.
!
Before transport and during movement outside the mowed area, the engine must be turned off and the mulching knife
movement stopped.
!
Do not work on steep slopes. Observe the max. inclination specified by the engine manufacturer in the engine manual.
Read the instructions for use before putting into operation!
When performing repairs on the cutting mechanism, remove
the high-voltage cable from the plug!
Beware, burn injury hazard!
Max. slope accessibility
Beware, rotating parts running down!
Maintain a safe distance from the machine, danger of injury
by a flying object!
Beware, rotating cutting tool!