Part I: General Safety Rules
6
disconnect the spark plug wire, keeping it away from the spark plug to prevent
accidental starting, wait 5 minutes for engine to cool down, then inspect for damage.
Vibration is generally a warning of trouble. Check damaged parts and clean, repair
and/or replace as necessary.
H.
Never tamper with safety devices. Check their proper operation regularly.
I.
Before performing any maintenance or inspection procedure, shut down the engine,
disconnect the spark plug wire keeping it away from the spark plug to prevent
accidental starting, wait 5 minutes for machine to cool down.
J.
Never allow people who are unfamiliar with these instructions to use the Wood Chipper.
Allow only responsible individuals who are familiar with these rules of safe operation to
use your machine.
K.
Never overload or attempt to chip woods beyond the manufacturer’s recommendation.
It could result in personal injury or damage to the machine.
L.
While using, don't hurry or take things for granted. When in doubt about the
equipment or your surroundings stop the machine and take time to look things over.
M.
Never operate the machine when under the influence of alcohol, drugs, or medication.
N.
Use the machine only in daylight.
O.
Stay alert for hidden hazards or traffic.
P.
Keep all nuts and bolts tight and keep the equipment in good operating condition.
A Note to All Users
List of warnings and cautions cannot be all-inclusive. If situations occur that are not covered
by this manual, the operator must apply common sense and operate this WOOD CHIPPER
in a safe manner. Contact the dealers for assistance in your area.
