Lumag GF9000GFS, Owner'S Manual

Page: 53 / 60

-
- 53 -
OPTIONAL EQUIPMENT
Intelligence Protect Switch
1. When the load reaches the rated power, indicator light turns green.
2. When the load reaches the maximum power, indicator light runs red, the buzzer alarms.
3. When the load exceeds the maximum power for 1 minute, it automatically switches off the output.
4. Press the switch, the generator set works again.
Automatic Generator System (AGS)
After installation, be sure the machine is not overloaded. Once the electricity goes out, the generator will cut off
outside circuit, starting and generating automatically. As the outsides power-supply becomes normal, the
generator will cut off itself and connect the circuit automatically.
NOTICE
If machine cannot start, please check that whether the indicator glitters when start the machine. And add oil if it
glitters
1. Be sure the load won’t be overloaded, then install the generator set;
2. Usually , the AGS switch on the control panel will be on “automatic” position, and the key on “running”