Luma LUM-500-NVR Series Quick Start Manual Download Page 6

Page: 6 / 16

NVR Quick Start Guide

Install the Luma Utility

Use the Luma Utility to locate your surveillance hardware and set up communications.

Download and Install the Luma Utility

Visit your product page at SnapAV.com and download the Luma Utility installer.

Once it has downloaded, double-click on the

Luma Utility

icon to run the installer. You can

click through and accept the defaults.

Locate the NVR

Run the Luma Utility.

It searches the local network for all Luma Surveillance devices. If your NVR does not appear,
ensure that the network connections are secure and that the unit is powered up, then click
the

button.

Click on the entry for your NVR to view its details. Double-clicking on the NVR opens its web
interface.

Luma NVR QSG pilot.indd 6

7/10/2015 11:13:24 AM

Summary of Contents for LUM-500-NVR Series

















Search results

Summary of Contents for LUM-500-NVR Series

Reviews:

Related manuals for LUM-500-NVR Series

Brands by name

Popular brands

Luma LUM-500-NVR Series, Quick Start Manual

Search results

Summary of Contents for LUM-500-NVR Series

Reviews:

Related manuals for LUM-500-NVR Series

Brands by name

Popular brands